Draft screen stand
4
Likes
106
Downloads
419
Views
Published on August 23, 2012
Description
I was having an issue with uneven/uncontrolled cooling making larger prints split on my makerbot. So I made 4 little stands that hold a cardboard screen in place around the build platform. Works a treat.
Instructions
Print out the stands.
Find 3mm cardboard (the box that my makerbot came in worked fine for me) and cut it to size (74cm x 18cm was what I used)
Fold the cardboard 25cm from each end and put the corner stands on.
Put the end stands on, put it in your makerbot, around the build platform and print those big prints worry free!
I take it out for smaller prints and to clean the build platter.
Find 3mm cardboard (the box that my makerbot came in worked fine for me) and cut it to size (74cm x 18cm was what I used)
Fold the cardboard 25cm from each end and put the corner stands on.
Put the end stands on, put it in your makerbot, around the build platform and print those big prints worry free!
I take it out for smaller prints and to clean the build platter.
License
Draft screen stand by teachermakesthings is licensed under the Attribution - Share Alike - Creative Commons license.
More from teachermakesthings
More from 3D Printer Accessories
You must be logged in to post a comment.