Balancing Spool Mount V2 (Prick-eared)
3
Likes
499
Downloads
900
Views
Published on August 24, 2012
Derived from
Balancing Spool Mount for Prusa Mendel
by Ablapo
Description
This is a fortified version V2 of my Balancing Spool Mount. I removed the anti rotation part in the middle. Now I am using toothed washers to prevent a rotation.
The left and the right arm are printed from the same stl file.
You will get an angled spool position for more stability by the 180 rotation of these arms.
Updated to Version 2 !
The left and the right arm are printed from the same stl file.
You will get an angled spool position for more stability by the 180 rotation of these arms.
Updated to Version 2 !
Instructions
Keep the metal rods leading to the spool as short as possible.
At the moment it is carrying a 2 kg weight. But use this mount at your own risk.
Version 1.0 - "F_Spool_Mount"
Version 2.0 - "Balance Spool Mount V2"
Added a picture of the weak spot of version 2.
At the moment it is carrying a 2 kg weight. But use this mount at your own risk.
Version 1.0 - "F_Spool_Mount"
Version 2.0 - "Balance Spool Mount V2"
Added a picture of the weak spot of version 2.
License
Balancing Spool Mount V2 (Prick-eared) by Ablapo is licensed under the Creative Commons - GNU GPL license.
More from Ablapo
More from 3D Printer Accessories
You must be logged in to post a comment.