Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Porsche 911 Turbo
28
Likes
1026
Downloads
3005
Views
Published on August 25, 2012
Description
Found the model online, cleaned it up and created an STL of it.
Instructions
No support needed, completely hollow. I printed mine with a .3mm layer height, I will try it again with a smaller layer height once I finish setting up my printer with a smaller nozzle. I suggest a using a fan. The wheels are in a separate STL I just drilled holes in them and mounted them with nails, My plan was to model the axles but I got distracted. Because It was imported the model isn't perfect so don't be too surprised if your g-code crater complains about it a little. The side mirrors have a removable support.
You must be logged in to post a comment.
DocRayStantz
on
August 28, 2012
said:
How close is the scale for Pinewood size?
Kidlatj
on
August 28, 2012
said:
The width is the same as the block thickness, (1-3/4") if you were to mount the regulation wheels to the outside of the body (and filled it with led) it would work. It would likely need to be scaled up a little though and the wheel wells modified if you want the wheels to fit inside the wheel wells. The length is about 4.5"
License
The base is a hot mess of plastic. Item not providing enough base-print to be successful.