Laughing Buddha (with flat base)
Description
The original had an uneven base, so I had problems starting the print. I made the bottom flat and even in Blender. As a result the file size was reduced from 16.2MB to 3.1MB (I honestly don't know why!).
Instructions
Print!
Printed perfectly at 15% infill, 0.2mm layer with 0.1mm skin. No supports needed.
Printed perfectly at 15% infill, 0.2mm layer with 0.1mm skin. No supports needed.
You must be logged in to post a comment.
Lodorenos
on
September 2, 2012
said:
Very nice, I'm going to try to print one to give to my brother. I'll post a picture!
Thaed
on
August 27, 2012
said:
Excellent. I used an older copy of Sketchup and the plug in probably did not optimize things making the file big. So when you edited it with Blender, it probably fixed that as well as the base. Thanks. Mr. Buddha (or Budhai) is very popular.
MacGyver
on
August 26, 2012
said:
I didn't have any real problems printing the original, however, I did notice the bottom wasn't flat. Thanks for fixing that!
License
Laughing Buddha (with flat base) by 3DTOPO is licensed under the Attribution - Creative Commons license.
More from 3DTOPO
More from Sculptures
Hi, how i can build a different layer height in skin?
That is controlled by whatever software you use to slice the .stl file...