Loading

mold for shotglasses

by tehWKD, published

mold for shotglasses by tehWKD May 5, 2010

Description

fill the mold with jello/vodka mix or just water, put it to the freezer, after they are set take out and remove from the mold and pour vodka in them and enjoy :)

Recent Comments

view all
Advanced party concept... Approved! :-D
it will probably increase print quality a lot. now the print head doesn't have to jump between doing 2 different things. narrow gaps between 2 tower like objects either means the head need to jump between them or will accidentally hit the old tower when building the new.
2 parts means that less chance of the "glass" breaking inside of the mold and easier to get out, also easier to clean the mold

Liked By

view all
Bre Pettis

Tags

License

GNU - GPL
mold for shotglasses by tehWKD is licensed under the GNU - GPL license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Advanced party concept... Approved! :-D
Why 2 parts instead of one?
it will probably increase print quality a lot. now the print head doesn't have to jump between doing 2 different things. narrow gaps between 2 tower like objects either means the head need to jump between them or will accidentally hit the old tower when building the new.
2 parts means that less chance of the "glass" breaking inside of the mold and easier to get out, also easier to clean the mold
They do need the hole to put liquid in the center...
Top