Loading

His and Hers Square Wedding Bands v1.0

by tinkerbelle, published

His and Hers Square Wedding Bands v1.0 by tinkerbelle Apr 7, 2014
1 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Contents

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Makes

Thing Statistics

11786Views 1298Downloads Found in Rings

Summary

Our real matching wedding bands. Square outside, circle inside. Perfect fit around our ring fingers. There is also an aesthetic indent running along the middle of the ring. The "hers" band is thinner and more rounded for a delicate look.

His: (in) 0.827w x 0.197d x 0.827h
(cm) 2.1w x 0.5d x 2.1h
Hers: (in) 0.738 w x 0.118 d x 0.738 h
(cm) 1.874 w x 0.3 d x 1.874 h

It all started in SolidWorks. It was prototyped using a Makerbot Replicator 2 in pla to check the sizes (about 20 minutes for 2 rings). Then we sent the files to Shapeways and printed with their new premium silver option (~$50 each). We'll keep iterating and improving the design through the years and experiment with different material options as they become available.

Collaborative project with http://www.thingiverse.com/Benjaminjaninja who shared his design and Solidworks expertise.

Instructions

Files created using SolidWorks. Original design files and stl files available for download. Customize it, print it out, engrave it, wear it, love it.

**Parameter Defaults***
Change the inner diameters of the ring noting that the wall edge isn't too thin. You can also play with the band thickness.

It is currently a ring size 4.75mm for "hers" and options of 7.75mm, 8mm, and 8.25mm for "his".

More from Rings

view more

All Apps

3D Print your file with 3D Hubs, the world’s largest online marketplace for 3D printing services.

App Info Launch App

This App connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file for p...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

What paint did you use to make this silver and how long did the paint hold up to wearing it? Thanks for sharing!

Hi Brandon! I sent the file to Shapeways and actually printed it using real Silver. I had printed a prototype in ABS plastic just to double check the size (as seen in one of the pictures). In the past, I have used spray paint for coloring makerbot pieces, which worked fine and has never chipped or worn off. Just remember to paint outside and allow time for it to dry. G'luck!

Top