Parametric Pipe Saddle Clamp
by sgraber, published
Used for hanging piping from rafters, joists, walls, etc.
I needed this for hanging a section of PVC pipe from a ceiling joist to hang my filament spools. Worked like a charm.
This Thing is fully parametric. Download the SCAD file and edit in OpenSCAD. You can adjust the saddle clamp by changing:
- Pipe diameter
- Strap width
- Length of the saddle clamp tabs
- Strap thickness
- Diameter of the screw hole
Make your changes, hit F6, export your STL, and print.
NOTE: The STL part uploaded here is for 22.3mm PVC pipe (7/8" diameter), 20mm strap width, 20mm strap tabs, 1.5mm strap thickness, and 4mm screw holes. I printed this part with 0 shells, 50% infill, 0.35mm layer thickness and it came out strong, yet flexible, on my Makerbot Cupcake.
Liked ByView All
Give a Shout Out
Parametric Pipe Saddle Clamp by sgraber is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure sgraber would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).