Ultimaker Extruder Gear Replacement IAN
16
Likes
744
Downloads
1685
Views
Published on August 27, 2012
Description
I wanted to print out a new extruder gear for my two ultimakers today, when i spotted that all the model data i found was not really what i wanted. One has too much detail that was not needed and the other, well the actual 3d model war really horrible. good luck to the poor users who try and run on that one...
anyway, i made a brand new 3d model today, printed and tested it. it works and i added ultimaker to the front because... im proud :-)
enjoy. Ian
anyway, i made a brand new 3d model today, printed and tested it. it works and i added ultimaker to the front because... im proud :-)
enjoy. Ian
Instructions
i printed this using cura.
print speed 90.
temp 230
infill 100 % ( i want this really stable)
if you need any more help, give me a buzz any time !
good luck and enjoy.
Ian :-)
UPDATE ! 31-8.2012
I have added the complete CINEMA 4D model file with all parts.
I have also taken out the text from the model.
UPDATE ! 31-8.2012
I have added gcode for printing, speed 100, temp 120 with PLA (ultimaker)
print speed 90.
temp 230
infill 100 % ( i want this really stable)
if you need any more help, give me a buzz any time !
good luck and enjoy.
Ian :-)
UPDATE ! 31-8.2012
I have added the complete CINEMA 4D model file with all parts.
I have also taken out the text from the model.
UPDATE ! 31-8.2012
I have added gcode for printing, speed 100, temp 120 with PLA (ultimaker)
You must be logged in to post a comment.
fluxline
on
September 3, 2012
said:
printed with recomended settings and came out perfect, i think maybe 2 microbubbles on the teeth hardly any hairs. Thanks!
Jennigma
on
August 30, 2012
said:
I sliced this in Kisslicer and found there was something odd about the layers with the text on them; it created paths for what would be empty space above the lower void in the wheel. Sending it through cloud.netfabb.com to see if it will fix, otherwise I'll try to pull the offending layers out of the gcode. I can send you the bad gcode file if you would like to see.
Thanks for making this- I really needed a new gear! Could you post your source file as well, so it could be edited?
bbum
on
August 29, 2012
said:
Printing now. Assuming my extruder doesn't clog itself, I'll post a pic.
License
Ultimaker Extruder Gear Replacement IAN by ultimakerinleipzig is licensed under the Attribution - Share Alike - Creative Commons license.
More from ultimakerinleipzig
More from 3D Printer Parts
AWESOME WORK Ian! We need to catch up soon :)