Button, 15mm diameter
by Virago, published
This is a simple button design. It is 15 mm diameter and it has 4 thread holes.
Print these at 100% fill. I used a 1mm drill to chase the thread holes after I printed it. I gave it a light sanding and polished it with a touch of acetone on a qtip cotton swab.
Liked ByView All
Give a Shout Out
Button, 15mm diameter by Virago is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Virago a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Virago would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).