Loading

UPDATED Upright AC Outlet Protector Plug (Duplex Cover)

by EliteNetworks, published

UPDATED Upright AC Outlet Protector Plug (Duplex Cover) by EliteNetworks Aug 29, 2012

Description

The original is printed with the plug prongs building vertically on Z axis. This creates weak plugs; mine tend to break and get stuck. This one is rotated 90* to ensure plug strength and longevity. This updated design now overengineered to my liking.

Recent Comments

view all
I found the plugs too thick to fit in outlet, and wish I didn't have that piece there that needed to be cut off.

More from Decor

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

This now needs printed with 1 additional shell (2 total). Infill can be light 6% - 12%, as 2 shells pretty much fill it up.

CHANGES Redesigned and overengineered for maximum strength for both prongs and plate. A rib on the plate is now present to prevent z-build breakage as well as for a 'pinch' handle to help with removal. Finger nail groves are now present on both top and bottom of plate to also help with removal from socket. Also, the width has been chopped slightly to allow installation side-by-side, for instance, on a surge protector/multiple outlet. Finally, the prongs are built upon a single-layer platform (between them), to ensure they stick on platform throughout the build. Simply take a razor blade and easily slice the single-layer platform away.

Builds great with 4x and 6x multiplier (tested on TOM HBP).

I found the plugs too thick to fit in outlet, and wish I didn't have that piece there that needed to be cut off.
Top