Cleaned and Scaled Cellular Lamp for Competition

by NewPerfection, published

Cleaned and Scaled Cellular Lamp for Competition by NewPerfection Aug 29, 2012


Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

25236Views 4646Downloads Found in Sculptures


This is simply a 75% scaled version of nervoussystem's Cellular Lamp, cleaned up in the free version of netfabb. This will be the RepRap competition piece for the weeks of Aug 28 to Sept 10 2012.

License is Attribution - Non-Commercial - Share Alike to be consistent with the original model.


Print with 2 to 3 shells and zero infill. This is not a requirement but just general advice - it worked well for my print but YMMV. Take a picture and post in the RepRap forum thread if you would like to participate in the competition. Prize is bragging rights and the choice of competition piece for the following weeks.

More from Sculptures

view more

All Apps

This App connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file for p...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App
Nov 25, 2015 - Modified Nov 25, 2015

How big is it in centimeters?

We printed this cool cellular lamp on Ultimaker 2 using PLA with 0.8 mm shell thickness and zero infill. Looks absolutely beautiful !

.15 layer sounds a bit high for a .25 nozzle

Having trouble slicing this in Slic3r. Crashes when it gets to the infill part even though I set it to 0.

It slices just fine for me in Slic3r 0.9.1. It is fairly complex though, if you don't have enough RAM available that could be the problem. It took less than 6 minutes to slice on my Core 2 Duo machine, not exactly new equipment.

I have 8 gigs of ram lol. Well, I got it to slice but through Repetier. Now I'm debating to commit to an 8 hour job haha

The estimate I'm getting is less than 4 hours to print, I'm just starting it now. Printing at 50 mm/s perimeter speed and 130 mm/s travel speed.

Hmm i could try printing at 50mm/s. Im experimenting with the .25mm nozzle and was going for .15 layer height.

Ah, that probably would get you to the 8 hour print time. I'm printing with a 0.4 mm nozzle and 0.2 mm layer height.

Which app did you use to generate this object?

I didn't make this. Take a look at the original Thing. The creator uses this: http://n-e-r-v-o-u-s.com/cellCycle/?l=4276http://n-e-r-v-o-u-s.com/cellC...

Thanks!! I will print this tonight :-)

It took almost 10 hours. Very nice figure.

I would like to know it too...