Bowling Pin
4
Likes
378
Downloads
779
Views
Published on September 1, 2012
Description
This is a regulation Tenpin Bowling Pin. It is modeled at 1:1 size meaning it is 15 inches tall by 4.766 inches in diameter. I have designed in four supports which can be trimmed off after printing.
Instructions
This was designed with Cubify Invent for the Cube printer.
Scale this object before printing. The scale will depend on your application. Due to the narrow base, I recommend using rafts when printing. As stated in the description, there are supports already placed on the model - additional supports are not necessary. See the photo for the finished object after trimming away the supports.
Build a Ten Pin Set, use a marble, and knock 'em down.
Scale this object before printing. The scale will depend on your application. Due to the narrow base, I recommend using rafts when printing. As stated in the description, there are supports already placed on the model - additional supports are not necessary. See the photo for the finished object after trimming away the supports.
Build a Ten Pin Set, use a marble, and knock 'em down.
License
Bowling Pin by dsmith1960 is licensed under the Attribution - Share Alike - Creative Commons license.
More from dsmith1960
More from Toys & Games
A support-less .FUN and .STL file have been added. Thank you for your interest.