by Zomboe, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Here's another thing, my first attempt at a tower. The columns on the second level are a little too close together but it still comes out pretty nice. It is just under 130mm tall so it should be possible on a MakerBot. A large size is also included, in case you're feeling ambitious!
Regular 60.0mm x 52.7mm x 129.7mm tall
Large 84.0mm x 73.7mm x 181.5mm tall
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Thing2 by Zomboe is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Zomboe a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Zomboe would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).