Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
MeanWell SP-320-12 Terminal Cover
14
Likes
192
Downloads
1225
Views
Published on September 9, 2012
Derived from
RepRapPro Mendel
by adrian-bowyer
Description
Cover for power supply.
I made it for the MeanWell I bought but it should fit any psu with the mounting holes as they seem to be pretty standard probably.
Derivative of the part ps-cover-1off.stl from thingiverse.com/thing:20968
I took out the bit on the inside.
Made the whole thing bigger.
Put bigger sides on with holes lined up with the mounting holes on the PSU.
Needs to be a bit longer, I think, but it fits with mine. I did have to bend the pins on the power input though.
Flipped the power input and output holes over to match with the terminal pins.
Made with Google SketchUp and netfabb Studio
I copied the same licence as the original.
I made it for the MeanWell I bought but it should fit any psu with the mounting holes as they seem to be pretty standard probably.
Derivative of the part ps-cover-1off.stl from thingiverse.com/thing:20968
I took out the bit on the inside.
Made the whole thing bigger.
Put bigger sides on with holes lined up with the mounting holes on the PSU.
Needs to be a bit longer, I think, but it fits with mine. I did have to bend the pins on the power input though.
Flipped the power input and output holes over to match with the terminal pins.
Made with Google SketchUp and netfabb Studio
I copied the same licence as the original.
Instructions
I used terminal screws to connect the cover.
On another thing I saw someone comment the mount holes need an M4 thread.
reprap.org/wiki/RepRapPro_Mendel_power_supply
On another thing I saw someone comment the mount holes need an M4 thread.
reprap.org/wiki/RepRapPro_Mendel_power_supply
License
MeanWell SP-320-12 Terminal Cover by SecondOne is licensed under the Creative Commons - GNU GPL license.
More from SecondOne
More from 3D Printer Accessories
You must be logged in to post a comment.