Loading

DeltaPanel

by scottmayson, published

DeltaPanel by scottmayson Sep 15, 2012

Description

New Improved version to stop warping Case with Ribs.
For more information regarding Smart-Adapter and Control Panel for RAMPS 1.4 http://scottmayson.com/RAMPS1-4-Production-Parts

Recent Comments

view all
Thanks for designing the case! I made an all black sliced with Hilbert Curves for the top/bottom infill and the front came out super sleek (except for a couple of curled traces). It looks great with the cog know I designed.
My LCD didn't fit perfectly because the screw bosses were too short. Could be that Case_with_ribs.stl has bosses that are too short? I made it work with some standard M3 nuts between the board and bosses.
Yes the back is open.
There is no back cover.

More from 3D Printer Accessories

view more

Liked By

view all

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Thanks for designing the case! I made an all black sliced with Hilbert Curves for the top/bottom infill and the front came out super sleek (except for a couple of curled traces). It looks great with the cog know I designed.
My LCD didn't fit perfectly because the screw bosses were too short. Could be that Case_with_ribs.stl has bosses that are too short? I made it work with some standard M3 nuts between the board and bosses.
Where is the cover for this?
Yes the back is open.
Nice design but I can´t find the cover of the case
There is no back cover.
This is an excellent case. I just put my board into my copy last night and it fits and works perfectly. I know how hard it is to get everything perfect even though it seems simple to make a box. I appreciate it.
I figured out that it was reversed. So I had to mirror it in RepG. Sadly I didn't figure it out till I printed it. It looks great, just backwards. So check it before you slice it.
The mirror must have been in your slicer. The stl files are correct for the ramps controller panel.
Is there a step-file available?
Very nice work, ill print it as soon as i have my new Black PLA.
Wich firmware do you use?
I Cant get marlin to work and dont like repetier...
At the moment i'm using Sprinter but that has no LCD support.
I use marlin on ultimaker and delta ramps 1.4 with slic3r and cura
cool, i like how the reset knob is desgned =-O
Yep it ok. though i think it needs a finger dimple or handle to allow fast rotation.
Top