Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
Model Rocket
6
Likes
481
Downloads
1065
Views
Published on September 14, 2012
Description
Model Rocket design to be 3D printed.
Instructions
A work in progress. Test prints and refinements are ongoing. Test prints of current model parts are in progress. Fin design is still in the works.
Motor compartment fits an 18 mm x 70 mm motor.
TODO: Fix the slots in the motor section.
TODO: Change the section connectors to be more generic/interchangeable.
TODO: Add a launch lug to the motor section.
TODO: Design fins.
TODO: Add an attachment point to the nosecone for chute & cord.
TODO: Add a means to hold the motor in place.
Long-Term TODO: Create a larger fairing to hold avionics or payload.
Long-Term TODO: Avionics design (C&DH) & sensors.
Long-Term TODO: XBee C&T link?
Motor compartment fits an 18 mm x 70 mm motor.
TODO: Fix the slots in the motor section.
TODO: Change the section connectors to be more generic/interchangeable.
TODO: Add a launch lug to the motor section.
TODO: Design fins.
TODO: Add an attachment point to the nosecone for chute & cord.
TODO: Add a means to hold the motor in place.
Long-Term TODO: Create a larger fairing to hold avionics or payload.
Long-Term TODO: Avionics design (C&DH) & sensors.
Long-Term TODO: XBee C&T link?
License
Model Rocket by SpinStabilized is licensed under the Attribution - Share Alike - Creative Commons license.
More from SpinStabilized
More from R/C Vehicles
You must be logged in to post a comment.