Space Invader Hanger
6
Likes
176
Downloads
685
Views
Published on September 15, 2012
Description
Print this out and use it as a; Hat hook, Headphone Holder, thing holder, christmas tree angel, whatever...
Instructions
You will need a 9mm bolt that is about 50mm long and a few M9 nuts to suit.
You print the little guy and remove support material carefully. You can print hollow for quicker results but it may look funny.
With the slot at the rear, slide your nut in and if need be, drill out a hole through the back at the desired height that aligns with the nut. Drill another hole in the surface you want to mount it to and feed your bolt through.
If you are wondering about how it is possible that the edges are only very thin but still holding togehter, then yes, this model has a support structure at the rear that keeps the squares from breaking apart.
I now have multiple colours and will print many different coloured ones.
Viola.
You print the little guy and remove support material carefully. You can print hollow for quicker results but it may look funny.
With the slot at the rear, slide your nut in and if need be, drill out a hole through the back at the desired height that aligns with the nut. Drill another hole in the surface you want to mount it to and feed your bolt through.
If you are wondering about how it is possible that the edges are only very thin but still holding togehter, then yes, this model has a support structure at the rear that keeps the squares from breaking apart.
I now have multiple colours and will print many different coloured ones.
Viola.
License
Space Invader Hanger by reschool is licensed under the Attribution - Share Alike - Creative Commons license.
More from reschool
More from Video Games
You must be logged in to post a comment.