Loading

Wearable Taurus Horns

by sciguy14, published

Wearable Taurus Horns by sciguy14 Sep 15, 2012

Description

When you're going to a Zodiac Signs Party, there is only one reasonable thing to do. Print your costume! I'm not really into astrology, but I am a Taurus, so I thought it would be fun to print out some Taurus horns. Just don't go charging into any of your friends - these things are sharp!

Recent Comments

view all

I would suggest that you make the hair band a little bit thinner. It seems to be a bit small for my head still and it is stiff enough that instead of bending, it managed to yank a few hairs.

Drill a small hole in the center of the horn and you can easily attach these to a ball cap using the standard holes to make a devil/demon horn set. You should screw an inch to an inch and a half diameter of plastic or other stiff material to the inside of the hat when putting it together to make sure the horns do not wobble.

My son is going to be bowser for Halloween this year. You just save me a little time...

More from Costume

view more

Makes

Liked By

view all

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Print out the headband and the horns. The headband is sized for my (average sized?) head, but you can easily scale it up or down in RepG. Size the horns for your preference - the model is enormous. I printed the horns in pure white PLA, and I made the band in black ABS. I recommend using a raft for the band, since it's a pretty large ABS part and will probably peel up otherwise. You might not need to if you print the band in PLA.

After both are printed, attach the horns with super glue. Make sure you angle them forward a bit, or else they'll look more like devil horns than bull horns. Let them set for a few hours.

Wear them, and instantly woo the nearest Cancer, Virgo, or Libra!

Comments

You must be logged in to post a comment.

nathanstenzel on Oct 28, 2013 said:

I would suggest that you make the hair band a little bit thinner. It seems to be a bit small for my head still and it is stiff enough that instead of bending, it managed to yank a few hairs.

nathanstenzel on Oct 27, 2013 said:

Drill a small hole in the center of the horn and you can easily attach these to a ball cap using the standard holes to make a devil/demon horn set. You should screw an inch to an inch and a half diameter of plastic or other stiff material to the inside of the hat when putting it together to make sure the horns do not wobble.

cymon on Oct 7, 2012 said:

My son is going to be bowser for Halloween this year. You just save me a little time...

Anonymous on Sep 16, 2012 said:

Well done!

naveod on Sep 15, 2012 said:

I think those have always been there.... ha Nice work. I hope college is treating you well ! :-D

Top