OpenBeam 608 bearing to NEMA 17 mount adapter
by OpenBeamUSA, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Our 608 Bearing to NEMA17 adapter is essentially a standard 608 skate bearing pillow block with a NEMA17 motor mount pattern. This allows the other end of a long drive shaft to be supported using the same bracket work that is supporting the NEMA17 motor.
Each of the mounting bolt holes contains a captive hex nut geometry. You can use this to capture either a DIN934 compliant nut, a nylock nut, or the head of a hex head cap screw.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
OpenBeam 608 bearing to NEMA 17 mount adapter by OpenBeamUSA is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving OpenBeamUSA a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure OpenBeamUSA would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).