Clamps for LED strips on aluminum channel
by hollyhudson, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These clamps will hold an LED strip against 3 sides of extruded aluminum channel for mounting on a wall. The one with an arch will hold a sconce in place, and the ones with the flanges will clamp down the edges of the sconce so they don't flare out.
Copy as many of the three components as you need for your length of aluminum and/or sconce material, and laser cut out of 6 mm acrylic. Clear acrylic with drafting film as the sconce material looks nice. The full project is described here: http://www.nycresistor.com/2012/09/16/sunrise-lamp-alarm-clock/#more-5581
Clamps for LED strips on aluminum channel by hollyhudson is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving hollyhudson a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure hollyhudson would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).