by oryhara, published
Case for the iphone 5. Modeled using the official dimensions published by apple. I liked the design of this thing: http://www.thingiverse.com/thing:5473, but it had really annoying features, which were difficult to print, so I built this from scratch. And this case has simple features, making it easy to print on a reprap. I'm printing right now. I'll post pics when it's done. And after my iphone5 shows up, I'll verify the fit and post updated files if it needs changing.
I did make use of the iphone5 mockup while modeling, just to have something to look at and compare.
You will need 24 2-56 SHCS (Socket Head Cap Screws)
they may be purchased here: http://www.mcmaster.com/#98511A133
It would seem now I am not the only person to have designed an iPhone5 case. Ordinarily i wouldn't clog thingiverse with superfluous duplicate things, but none of the other cases meet my needs, so I would have designed this anyway.
Liked ByView All
Give a Shout Out
iPhone5 Case by oryhara is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure oryhara would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).