Recreus Extruder - Base Mountable
by Gyrobot, published
Number 1 of 5 for Gyrobot's Extruder Week.
Like the original, only base mountable at 50mm hole pitch which is Wades compatible.
There is a slot for an M6 captive nut so you can add your own hotend or use the Recreus style one.
Full filament support after the MK7 gear wheel allows a PTFE tube insert to be added down into the hotend for flexible filament printing. If you want to know how to print with this type of filament, please read the following article.
Currently mounted and performing well on an old Prusa Mendel
Print with support due to Nema motor recess in rear of model.
If using an M6 all metal hotend mounted directly into this extruder then a 40mm cooling fan mounted on the front face blowing air over the hot end heatsink is a requirement.
Drill out hole if inserting a PTFE liner.
- Insert M6 captive nut for hot-end.
- Insert M5 captive nut for tensioner.
- M5 locknut
- M5 screw
- 4mm spring
- Bearing 624
- M4 screw for Bearing
Liked ByView All
Give a Shout Out
Recreus Extruder - Base Mountable by Gyrobot is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure Gyrobot would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).