Axon wing spar with balsa frame and brace cutouts
by northshore, published
Wing spar with a 177 mm chord, created to build a film covered wing for the Axon FPV flyer.
Bracing is with spruce and balsa at the COG and the trailing edge, with further cut outs to fit 1.2mm balsa sheeton the trailing and leading edges.
The rectangular hole near to the leading edge has been sized to suit a 5g servo which can be glued or screwed from the rear.
Can be scaled to suit larger wing sections or the centre spa refitted with 6mm square carbon rod.
20% infil, 2 layers, best to reduce the travel speed to 40 or 45 so the filament desent drag out of the tight corners
Liked ByView All
Give a Shout Out
Axon wing spar with balsa frame and brace cutouts by northshore is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving northshore a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure northshore would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).