Digital designs for real, physical objects. A Universe of Things!

Thingiview of PrintruderKnob.stl

Knob for Printruder II tension adjustment bolt

Created by
Revar
Created on May 10, 2010

If you make a Printruder II ( thingiverse.com/thing:1980 ), and use a standard hex headed M4 x 40mm bolt for the tension adjustment, then you can more easily adjust the idler tension if you have a knob on the end of the bolt. This is that knob.

Instructions

Print.
Insert M4x40mm bolt through the central hole so that the hex head nestles into the hex shaped hole.
Press fit if needed.

Required Tools

3D Printer

Comments