iPhone 4 case - SketchUp

by jbobrow, published

iPhone 4 case - SketchUp by jbobrow Sep 23, 2012

Thing Info

19559Views 4910Downloads Found in Mobile Phone
Report Thing


This is a standard iPhone 4/4s case that is based off of http://www.thingiverse.com/thing:22572#
The model is in a SketchUp format for easy modification and printing through a service such as Shapeways. This model has been tested and printed successfully through Shapeways.


From those that have printed:

Shapeways: Ordered in white/strong/flexible polished and snaps on to be a snug fit.
Replicator: Scaled 1.01 before printing @ .2mm

More from Mobile Phone

view more

Thing Info

19559Views 4910Downloads Found in Mobile Phone
Report Thing


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

All Apps

This App connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file for p...

App Info Launch App

How did you make the curves fit to the iPhone?

The dimensions are based off of the specs given for Apple's iPhone 4s. Apple is quite kind in providing great documentation for their devices as found here: https://developer.apple.com/resources/cases/https://developer.apple.com/re...

This model is to small - needs to be scaled up before it can be used!

Printed with Shapeways White/Strong/Flexible it fits the iPhone 4s for me.

it needs to be more than 1.01 to be good size. I had to crack it off to get my phone out

Thanks for uploading it as a Sketchup file! I was able to modify it and imprint a letter very easily!

th is means i can make my own using this as a  template!!  thank you thank you thank you. Of course they would be derivitives

first print at 100% didnt fit so I had to scale it up 1.01% to make it fit.... I printed it on my replicator with .2 layer thickness. Sanding it smooth down to 1000 grit sounded like a good idea but is not it just made it easy to scratch... Although sanding just the top edges worked well.

hmm, I will add this to the instructions. is there any additional information that should be posted for printing on the replicator?

Also, I would love to see photos of how it comes out from different printers.