Linked square chain
by berserkerscientist, published
This 4 link chain will print as one piece. The links are about 10mm square, and 2mm thick. I was inspired when I saw this clutch (thing:31312). I'll probably chamfer all the corners, to make the links symmetrical.
I used 10% infill and 0.2 mm layer height, but this can be changed. I always use 230F nozzle and 110F bed temperature. Using a slower feed rate is better.
Liked ByView All
Give a Shout Out
Linked square chain by berserkerscientist is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure berserkerscientist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).