Sappho's Head Large
by SnacksOnSnacks, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I really liked the sculpture, so I wanted to print it as large as I could.
Print the three pieces and then super glue them together. Some sanding may be required if you experience any curling. I found that if I sanded the seams a lot, then glued them together, the plastic residue created sort of an ABS paste which helped hide the seams. I was thinking about painting it in a layer of Acetone to smooth it out, but I sort of enjoyed the 'thumb print' feel it has.
Final print off my Replicator stands about 10 and a half inches tall. Very nice, especially at an arms distance.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sappho's Head Large by SnacksOnSnacks is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving SnacksOnSnacks a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SnacksOnSnacks would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).