Solar-Lite Mason Jar Mount
10
Likes
78
Downloads
1081
Views
Published on September 29, 2012
Description
Ready to convert those cheap solar lites? This is the Mason Jar Mount that will snugly fit a 1/2" conduit.
It will breath new life into the old lamps.
It will breath new life into the old lamps.
Instructions
1)Print these mounts
2) They will need cleaned up a bit (use a dremel)
3)Spray paint the mason jar rings to match the solar lamp
4)Spray-Paint the jars with some spray-frost (Ace is the place!)
5)Mount the rings to the underside of the solar panels
6)Screw on the jars
7)Cut a 12" piece of 1/2" conduit and drive it into the ground
8)Press these printed mounts onto the conduit and press in the Mason Jar
*It's easier to use a tubing cutter for the conduit
2) They will need cleaned up a bit (use a dremel)
3)Spray paint the mason jar rings to match the solar lamp
4)Spray-Paint the jars with some spray-frost (Ace is the place!)
5)Mount the rings to the underside of the solar panels
6)Screw on the jars
7)Cut a 12" piece of 1/2" conduit and drive it into the ground
8)Press these printed mounts onto the conduit and press in the Mason Jar
*It's easier to use a tubing cutter for the conduit
License
Solar-Lite Mason Jar Mount by XSF1 is licensed under the Attribution - Share Alike - Creative Commons license.
More from XSF1
More from 3D Printing
You must be logged in to post a comment.