by profezzorn, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
It's a companion cube that is also a bottle opener. As a bonus, the scad file can make any flat-bottomed object into a bottle opener.
Print, screw in an M3x25 or M3x20 cap screw into the bottom. Enjoy with your favorite bottled drink. If the cube starts talking to you, stop drinking immediately and dispose of the cube in the nearest incinerator.
Note that there is a fair amount of 45-degree overhang in there, and having smaller layers should help. (Half your nozzle size or less) Good fans also help.
Bottle Companion by profezzorn is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving profezzorn a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure profezzorn would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).