Loft trapdoor catch bracket
by davidmpye, published
Many UK loft trapdoors have a rotating latch that clips into a bracket mounted to the trapdoor frame.
This is such a bracket!
Print it, mount it using screws through the two screw holes and bingo!
You may need to tweak the parameters in the SCAD file to match the width of your trapdoor catch etc.
I printed mine using 75% fill (rectilinear) for strength, just to be sure, but that's almost certainly overkill!
Give a Shout Out
Loft trapdoor catch bracket by davidmpye is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure davidmpye would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).