Loading

BeagleBoard Rev C Case

by builttospec, published

BeagleBoard Rev C Case by builttospec Oct 4, 2012

Description

This is a laser cut enclosure design for the BeagleBoard Rev C. It's got access to the expansion header or alternatively a mount for a 9-pin D-sub for direct serial terminal access or to use as an auxiliary serial port. The whole thing clips together with some special Delrin clips for easy assembly as well!

Recent Comments

view all
The etched labels are reversed for the User and Reset buttons. I know this because we bought some for the office. You can see it in the picture if you look at the post labeled Reset and follow the post down to the button on the board labeled USER.

More from Computer

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Cut the black lines and etch the red ones. All the components except the clips are cut out of 3mm acrylic. The Delrin clips are cut from 1/8" Delrin sheet stock.

Instructions on assembly with tons of pictures can be found here:
built-to-spec.com/blog/kit-instructions/beagleboard-rev-c-enclosure-instructions

More details on the clips here:
built-to-spec.com/blog/?p=1062

You can get a kit of this thing here:
nvy.gd/VcesUF
The etched labels are reversed for the User and Reset buttons. I know this because we bought some for the office. You can see it in the picture if you look at the post labeled Reset and follow the post down to the button on the board labeled USER.
Top