Single wall spring gear
12
Likes
581
Downloads
1220
Views
Published on October 4, 2012
Description
Springy gears, not really functional just for fun.
Inspired by:
Sam's gears: thingiverse.com/thing:30981
Flexible gears:
thingiverse.com/thing:31128
Inspired by:
Sam's gears: thingiverse.com/thing:30981
Flexible gears:
thingiverse.com/thing:31128
Instructions
Print with a single wall and no top/bottom infill. Same as the bracelets.
You can use the SCAD file to generate different gears, with different amounts of teeth, larger bore or even a different pitch radius.
You can use the SCAD file to generate different gears, with different amounts of teeth, larger bore or even a different pitch radius.
You must be logged in to post a comment.
laird
on
October 4, 2012
said:
Cool. This should be a wonderful 'demo' print!
Daid
on
October 4, 2012
said:
Thanks. At 10mm height it took me about 10 minutes to print one 12 teeth gear on an Ultimaker, but I think you could speed that up a bit.
I'll add my Cura slicing profile that I used later on. Because the slicing settings are pretty important for this print. You need a single wall with retraction, no infill, no top/bottom, and proper temperature.
License
More from Daid
More from Mechanical Toys
see my functional springy wheels XD
http://www.thingiverse.com/thi...