by 64BFox, published
This is a simple nosecone design with an additionally reinforced tip, and reinforced body.
Being designed for a paper rocket, this was sized appropriately to fit on the end of a rocket meant to be fired off of a 1/4 inch PVC pipe. I would recommend avoiding applying launch pressure directly to the bottom of the nosecone, so sealing the tube before attaching the cone may be a good Idea.
WARNING: This design has NOT yet been tested, and may not be strong enough to withstand landing forces.
Give a Shout Out
Nosecone by 64BFox is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure 64BFox would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).