Gattling gun for Davincibot
Description
Instructions
Squirt a bead of hot glue in the deep cylindrical recess and shove a #4 finishing washer into it. Center the washer as best you can.
Hot glue a 5mm diameter magnet in the hemispherical recess on the front of the gun. Make sure the poles are properly aligned by holding the magnet in a spare finishing washer as you press it into the glue.
Mount it on a Davincibot and make machine gun noises at your dog.
For more details check out my instructable at:
instructables.com/id/Davincibots-Create-a-3d-printed-modular-robot-toy/
The scad file is included for your perusal. It should be easy enough to change sizes and number of barrels in case you wat to.
Hot glue a 5mm diameter magnet in the hemispherical recess on the front of the gun. Make sure the poles are properly aligned by holding the magnet in a spare finishing washer as you press it into the glue.
Mount it on a Davincibot and make machine gun noises at your dog.
For more details check out my instructable at:
instructables.com/id/Davincibots-Create-a-3d-printed-modular-robot-toy/
The scad file is included for your perusal. It should be easy enough to change sizes and number of barrels in case you wat to.
License
Gattling gun for Davincibot by Dealywhopper is licensed under the Attribution - Share Alike - Creative Commons license.
More from Dealywhopper
More from Mechanical Toys
You must be logged in to post a comment.