Electronic Star Bird replacement thruster
by lungofish, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Milton Bradley's Electronic Star Bird was the coolest toy you could hope to find under the tree in Christmas 1978.
Ok, maybe the Kenner Millenium Falcon was cooler, but that point is debatable.
Anyway, it was a very cool looking spaceship with a very nifty electronics package and a whole bunch of little plastic parts that tended to fall off and disappear forever.
This is one of those parts, one of two smaller thrusters that go on either side of the main engine. Star Birds available on ebay are frequently missing one or both of these parts.
I highly recommend printing this from an SD card rather than over USB. My first attempt (using USB) had a lot of pausing issues at the back end where it has little flutes on the nozzle, and this resulted in a lot of blobbing. The SD card version had none of those issues.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Electronic Star Bird replacement thruster by lungofish is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving lungofish a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure lungofish would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).