by EhisforAdam, published
A spiky crown made for a costume project. Creating something like this with solid modeling isn't ideal...
Diameter: 140mm (5.5")
Front spike height: 160mm (6.25")
Other spikes height: 110mm (4.24")
If you want to print with support, I've provided the full model. Depending on the size you want the the printer you have you can either print the separate pieces or print as the top half and add the bottom spikes onto it. Keep in mind the size is smallish, so it may need to be resized for larger heads.
For large printers print:
For Smaller printers (Sized for Thing-O-Matics) Print:
2XCrown1-Back (Can be printed 2 at a time in an array)
4XCrown1-Bottoms (Can be printed 4 at a time in an array)
All the pieces are tabbed so they'll fit together when printed. When we assembled it, we glued everything together using acetone.
Liked ByView All
Give a Shout Out
Spiky Crown by EhisforAdam is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is not allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving EhisforAdam a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure EhisforAdam would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).