Travel Settlers of Catan pieces
by adina, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I bought a travel set of Settlers of Catan, but I didn't like the size of the board and pieces. I made my own cardboard tiles, settlements, cities, and roads, but they never really worked very well. Now that I'm a member of think|haus, however, I have ready access to a laser cutter! Thus this project was born.
The files I've included here should help you laser cut settlements, cities, and roads for a small version of Settlers of Catan. You'll want to cut these pieces out of three to six different colours of 3mm acrylic.
The gcode file is specifically tailored to work with the think|haus laser. It uses linuxEMC. You may need to modify it to work on your laser. It's also not very optimized - I just took the raw output from our svg-gcode converter. I do have another file which is much better. I'll try to remember to upload it later. This one will work, it's just inefficient and it irks me ;)
Travel Settlers of Catan pieces by adina is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving adina a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure adina would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).