Hey! This thing is still a Work in Progress.
Files, instructions, and other stuff might change!
It's Miku!
12
Likes
246
Downloads
2130
Views
Published on October 9, 2012
Description
はじめまして、初音ミクです!
A 3D scan of a Miku figurine I own, made with a NextEngine scanner in ScanStudio HD PRO. This was my first run at 3d scanning something, so the mesh has a few problems (holes). I was also unable to get the figure to stay in one pose long enough to get multiple angles.
Update! Successfully made on an Up! printer using 0.2mm layers. The body seems to be 2 discrete closed forms, however, so some gluing was involved. Hopefully I'll get a better scan later.
A 3D scan of a Miku figurine I own, made with a NextEngine scanner in ScanStudio HD PRO. This was my first run at 3d scanning something, so the mesh has a few problems (holes). I was also unable to get the figure to stay in one pose long enough to get multiple angles.
Update! Successfully made on an Up! printer using 0.2mm layers. The body seems to be 2 discrete closed forms, however, so some gluing was involved. Hopefully I'll get a better scan later.
Instructions
The scanner was not able to capture the joint area between her outsize pigtails and her head, so they are actually separate entities. Full support is needed if you want to try printing it.
Some parts of it seem to have errors which cause ReplicatorG to generate garbage. The software that comes with the Up! printer seems to handle it fine, as does CatalystEX.
Some parts of it seem to have errors which cause ReplicatorG to generate garbage. The software that comes with the Up! printer seems to handle it fine, as does CatalystEX.
License
More from Sculptures
You must be logged in to post a comment.