Dual 2.5 inch HDD bracket
by mrath, published
Bracket for mounting two 2.5" harddrives on a flat surface.
Use standard HDD rubber mounts (see pic) for mounting the HDDs.
Print two brackets (there is an STL with two pieces), and position them appropriately (attach one HDD and mark the position of the mounting holes).
Attach brackets using four M4 screws, mount HDDs with appropriate length M3 screws.
Liked ByView All
Give a Shout Out
Dual 2.5 inch HDD bracket by mrath is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving mrath a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mrath would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).