by brooklynmuseum, published
3D models for Emma Ohnoes, our physical cloud infrastructure indicator: https://github.com/brooklynmuseum/emma_ohnoes.
Details on the Arduino Yún setup and schematics are available on Github: https://github.com/brooklynmuseum/emma_ohnoes.
Print the scan of Emma-O in a transparent material--We used transparent blue PLA. For the base and lid we used an opaque black PLA but it can be any color you'd like.
The holes in the back snugly fit a cat45 cable and usb micro cable. Some cable sizes might need larger holes, feel free to adjust the design on Tinkercad: https://www.tinkercad.com/things/kVchx57TCWp-emma-ohnoes-base/edit.
The lid's upper opening can also be adjusted for different size models: https://www.tinkercad.com/things/aNXL1nowG2A-emma-ohnoes-lid/edit.
Once all the models are printed, glue Emma to the lid. We used some Gorilla glue that was laying around at NYC Resistor. Your local hackerspace may have a similar adhesive.
Liked ByView All
Give a Shout Out
Emma-Ohnoes by brooklynmuseum is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving brooklynmuseum a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure brooklynmuseum would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).