EcksBot Spool Hook
9
Likes
287
Downloads
1309
Views
Published on October 13, 2012
Description
Designed to mount onto or assembled into the Ecksbot.
Inspired by, but not derived from:
thingiverse.com/thing:14581
thingiverse.com/thing:18702
scad file has switch to change mount type.
spacer=0 Clip-on mount
spacer=1 Use Hook in place of Spacers in Ecksbot build. (Untested!)
I recomend using a filament guide (thing:16267 V4)
Enjoy
Note: Released Flies more rounded than Pictured Prototype.
Update: Works with new EckerTech spools!
Inspired by, but not derived from:
thingiverse.com/thing:14581
thingiverse.com/thing:18702
scad file has switch to change mount type.
spacer=0 Clip-on mount
spacer=1 Use Hook in place of Spacers in Ecksbot build. (Untested!)
I recomend using a filament guide (thing:16267 V4)
Enjoy
Note: Released Flies more rounded than Pictured Prototype.
Update: Works with new EckerTech spools!
Instructions
Print EcksHook1Clip.stl
Clip it to Spacers between frame and right Z motor mount.
OR
Print EcksHook1Spacer.stl
Use inplace of spacers in Ecksbot build
Then
Clip on guide.
Thread filament.
Enjoy!
Clip it to Spacers between frame and right Z motor mount.
OR
Print EcksHook1Spacer.stl
Use inplace of spacers in Ecksbot build
Then
Clip on guide.
Thread filament.
Enjoy!
You must be logged in to post a comment.
License
More from Komb
More from 3D Printer Accessories
I printed the clip-on version, and it did clip to the ecksbot without me having to disassemble anything to install the spacer version. The clip was very tight though! I thought the part might have been slightly too big on one part, but with enough force I was able to get the clip on without modification.