by sjjehl, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My dog's name is Chase. He licks people and needed a new tag. 3d printing to the rescue.
I didn't come up with the clever "lick you" thing. Someone on etsy makes similar ones.
I left room on the bottom of the "name" side for derivatives to add their phone number. I took mine off so you guys wouldn't all text chase and invite him to the dog park.
You may want to scale a bit based based on the size of your dog. printing as is should result in a 50 mm diameter tag.
If you print in pla super glue the two sides together. If you use ABS make a slurry of acetone and abs scraps and glue with that. You'll never know it was two pieces.
Go throw the frisbee.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Chase's Tag by sjjehl is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving sjjehl a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure sjjehl would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).