Reprap flag for 8mm pole
4
Likes
118
Downloads
570
Views
Published on October 15, 2012
Description
Don't cut those smooth rods, show your colours!
This is one of the first thing I designed and printed. If your printer is well calibrated you shouldn't have overhang issues like on my pictures.
I also reduced the insert's size by 0.25mm, hopefully your flags shouldnt crack like one of mine did. Let me know if this happens I'll reduce it further.
This is one of the first thing I designed and printed. If your printer is well calibrated you shouldn't have overhang issues like on my pictures.
I also reduced the insert's size by 0.25mm, hopefully your flags shouldnt crack like one of mine did. Let me know if this happens I'll reduce it further.
Instructions
Printed with a .35 mm nozzle with filament from Ultimachine.
1-Print with a brim / skirt
2-Print slowly
3-Be gentle when installing the insert
4-Wear it with pride!
1-Print with a brim / skirt
2-Print slowly
3-Be gentle when installing the insert
4-Wear it with pride!
You must be logged in to post a comment.
License
Reprap flag for 8mm pole by thecrazy is licensed under the Attribution - Non-Commercial - Creative Commons license.
More from thecrazy
More from 3D Printer Accessories
I know i know, the colors on my part are reversed, but you can print it in any color you like.