Honey Comb iPhone 5 Case

by Gromfrog, published

Honey Comb iPhone 5 Case by Gromfrog Oct 15, 2012

Thing Info

31366Views 6506Downloads Found in Mobile Phone
Report Thing


A beautiful iPhone 5 Case with a honeycomb texture on the back.



Just print with a high infill and not support. But we do suggest using a raft.

More from Mobile Phone

view more

Thing Info

31366Views 6506Downloads Found in Mobile Phone
Report Thing

Liked By

View All


Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
This comment has been deleted.

I am printing now with PLA. How would I remove the raft after it is done printing?

Hi Migwke,
Carefully peal it off using a set of pliers. We have printed hundreds of these and never had issues with removing the raft.

Pro tip: if your first layer speed is low, watching this thing print will be about six different kinds of painful.

I printed it and the hole for the camera is on the wrong side, the other holes are also mirrored. I checked in slic3r and pronterface and it seems okay. Can anybody help?

Hi flow we believe this would be an issue with the slicer or you have flipped the design in some software. Try redone loading the file. We have had no issues an we have printed over 800 of these.


Hi Ryan,
my y axis was inverted. Now it's printing fine.

Hi Flow,
Glad to hear you have sorted your problems do you like the case?


Printing in blue ABS now, it's like watching blockbuster.

what % infill do you recommend?

Hi teledude, we recommend using about 10%

The 3D Library

Is support needed for the overhang? I'm assuming so

Printed in pla. Fits well

Thanks for printing, we haven't yet tried with PLA but glad to hear it fits nicely. Enjoy!


Honey Comb... on an iPhone???

Just realized that, Thanks for pointing it out, May be someone would like to bring android to their iPhone.

Ryan King