Pumpkin LED Lamp Shades
14
Likes
261
Downloads
1223
Views
Published on October 15, 2012
Description
Little Jack'o'Lantern Pumpkins sized to fit 5mm (5.5mm inner hole diameter) and 10mm (10.5mm inner hole diameter) LEDs.
Instructions
1. Either pick one of the two included STL files to print, or modify the OpenSCAD source file to suit your needs.
2. For the smaller pumpkin for 5mm LEDs, print a 2x2 array of them so the smaller footprints have time to cool between layers. The 10mm LED pumpkins print fine as singles.
3. Insert LED.
4. Apply power.
5. Ooooh! Shiny!
Source code can also be found at github.com/clothbot/makerbot/blob/master/fabjects/Toys/Halloween/pumpkin.scad
2. For the smaller pumpkin for 5mm LEDs, print a 2x2 array of them so the smaller footprints have time to cool between layers. The 10mm LED pumpkins print fine as singles.
3. Insert LED.
4. Apply power.
5. Ooooh! Shiny!
Source code can also be found at github.com/clothbot/makerbot/blob/master/fabjects/Toys/Halloween/pumpkin.scad
License
Pumpkin LED Lamp Shades by clothbot is licensed under the Attribution - Share Alike - Creative Commons license.
You must be logged in to post a comment.