Rapman 3.2 Extruder Coolers
5
Likes
213
Downloads
1212
Views
Published on October 15, 2012
Description
This is a set of extruder coolers for the rapman 3.2 with tow extruders.
Simple to bulid and no support needed.
Simple to bulid and no support needed.
Instructions
I printed the coolers in blue PLA an they fit perfect on the original extruder carriage of a rapman 3.2.
You only have to drill 4 smal holes (3mm) into the carrige.
Also you need to cut six 3mm threads into the each printed part and then you can mount it on the carrige.
At last you have to mount the fan an your extruder will never ever overheat ...
You only have to drill 4 smal holes (3mm) into the carrige.
Also you need to cut six 3mm threads into the each printed part and then you can mount it on the carrige.
At last you have to mount the fan an your extruder will never ever overheat ...
License
Rapman 3.2 Extruder Coolers by Bundes-Metal-Minister is licensed under the Attribution - Share Alike - Creative Commons license.
More from Bundes-Metal-Minister
More from 3D Printer Extruders
You must be logged in to post a comment.