2.5in-to-3.5in bottom-mount adapter
by kitlaan, published
If you have a case with 3.5" hard drive cages that mount drives via the bottom holes, then the 2.5"-to-3.5" adapters that come with your SSD probably don't work...
Print one of the designs; the "thin" adapter is structurally sound enough for holding a SSD, but if you want the extra heft, you can use the solid adapter.
Screw the adapters to the SSD (usually the obtuse angle toward the SATA ports), then screw the entire thing to the cage.
(image shows a 2.5" laptop HDD)
Liked ByView All
Give a Shout Out
2.5in-to-3.5in bottom-mount adapter by kitlaan is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure kitlaan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).