by indraastra, published
A relatively sturdy 24"x12" plywood+MDF tray.
In the pictures of the prototype, the sides are made from plywood and the base from a thin sheet of MDF, but an acrylic base would look better for the final design.
The design can be cut out twice to make both sides (they are symmetric), and the base is just a simple 24"x12" rectangle. The sides form a slightly larger area to accomodate the base in the groove cut into each piece.
Liked ByView All
Give a Shout Out
Plywood Tray by indraastra is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving indraastra a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure indraastra would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).