Curtain String Weight
by DanLuc, published
You might not need this but then again if you have a puppy you just might.
Our puppy, Joy decided to have a go at the string weight so I had to make another one.
The DWG file is there so you can make adjustments but the metal weight I had was 5X20X89mm.
Also I kept the outside diameters of the pice so the walls are a bit thick. And the little prongs are only 4mm in diameter so you might want that infill to be a bit high for those parts otherwise crazy glue everything on.
Liked ByView All
Give a Shout Out
Curtain String Weight by DanLuc is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure DanLuc would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).