Enhanced Servo Button
by hyla, published
Enhanced 'Servo Button' for various designs with servos and servo brackets (e.g. http://www.thingiverse.com/thing:5784). Instead of glueing the button to the servo one can now screw it onto it.
Print it. Scale is in mm. Due to ABS shrinkage I had to upscale my model slightly. YMMV.
Remove the lid of the servo (back side) and put a hole through it.
Insert the nut into the servo button, attach the button to the lid with the screw, put back lid. Use an 'M3'-type screw with a length of about 10mm.
Make sure the head of the screw doesn't touch anything electrical inside Your servo. If in doubt, add some isolation.
Liked ByView All
Give a Shout Out
Enhanced Servo Button by hyla is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving hyla a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure hyla would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).